Allied Telesis AT-S39 - Manual (Page 94)

94
Chapter 11
STP Commands
❑ ACTIVATE STP on page 95
❑ DISABLE STP on page 96
❑ ENABLE STP on page 97
❑ RESET STP on page 98
❑ SET STP on page 99
❑ SET STP PORT on page 101
❑ SHOW STP on page 103
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S39 Management Software User’s Guide for
background information on the Spanning Tree Protocol (STP).