Allied Telesis AT-S39 - Manual (Page 192)

Chapter 21: Command Reference
192
Rapid Reconfiguration Spanning Tree Commands
ACTIVATE RSTP
activate rstp
Designates RSTP as the active spanning tree on the switch.
DISABLE RSTP
disable rstp
Disables RSTP on the switch.
ENABLE RSTP
enable rstp
Enables RSTP on the switch.
RESET RSTP
reset rstp
Returns all bridge and port RSTP parameters to the default settings.
SET RSTP
set rstp [default] [priority=priority]
[hellotime=hellotime] [forwarddelay=forwarddelay]
[maxage=maxage]
[forceversion=forcestpcompatible|normalrstp]
Sets the RSTP parameter settings.
SET RSTP PORT
set rstp port=port [default]
[portcost=auto|portcost]
[portpriority=portpriority] [edgeport=yes|no]
[pointtopoint=yes|no|autoupdate]
[migrationcheck=yes|no]
Sets a port’s RSTP parameter settings.
SHOW RSTP
show rstp [portconfig=port|portstate=port]
Displays the RSTP parameter settings.