Allied Telesis AT-S39 - Manual (Page 31)

AT-S39 Command Line Interface User’s Guide
31
RESET SYSTEM
Syntax
reset system [name] [contact] [location]
Parameters
name Deletes the name of the switch.
contact Deletes the name of the network administrator
responsible for managing the unit.
location Deletes the location of the switch.
Description
This command deletes the information listed above in Parameters.
Omitting the parameters deletes all three items from the switch.
To set the name, contact, and location information for a switch, refer to
the SET SYSTEM command. To display the information, use the SHOW
SYSTEM command.
Examples
The following command deletes all three items:
reset system
The following command deletes just the location:
reset system location