Allied Telesis AT-WA7500 - Manual (Page 157)

AT-WA7500 User’s Guide
157
To configure spanning tree security
Note
You do not need to perform this procedure if you are implementing
an 802.1x security solution. 802.1x authentication automatically
enables secure IAPP and secure wireless hops. See Implementing
an 802.1x Security Solution on page 164.
1. From the Main Menu, select Security then Spanning Tree Security.
The Spanning Tree Security screen appears.
2. Check Secure IAPP box.
3. Select Submit Changes.
4. In the IAPP Secret Key field, enter a secret key. This secret key must be
between 16 and 32 bytes.
5. Determine how the access points authenticate to the network.
‰ Check Allow SWAP box if you have older access points or you are
not implementing an 802.1x security solution.
‰ Check Allow TLS box, if you are implementing an 802.1x security
solution and you want to use TLS. The access point must have a
client certificate loaded on it.