Allied Telesis AT-WA7500 - Manual (Page 30)

1 - Getting Started
30
a. From the Main Menu, select Spanning Tree Settings. The
Spanning Tree Settings screen appears.
b. In the Root Priority field, enter 0.
c. In the Secondary LAN Bridge Priority field, enter a number other
than zero.
d. In the Secondary LAN Flooding field choose Enabled.
5. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, Saving Configuration Changes on
page 41.
6. Configure the master radio in the point-to-point bridge on the
primary LAN.
a. From the Main Menu, select the link corresponding to the master
radio. The radio screen appears.
a. In the Node Type field choose Master, and then select Submit
Changes.
7. Configure the spanning tree settings for the point-to-point bridge on
the primary LAN.
a. From the Main Menu, select Spanning Tree Settings. The
Spanning Tree Settings screen appears.