Allied Telesis AT-WA7500 - Manual (Page 225)

AT-WA7500 User’s Guide
225
FR
Purpose: Finds the first executable file in the access
point boot segment and tries to run it;
therefore, the first executable file in the
access point boot segment must be the
boot file.
Syntax: FR
FX
Purpose: Downloads a file using Ymodem batch
protocol into the flash segment that is
specified by s.
Syntax: FX s
where s is segment 1, 2, 3, or 4.
MR
Purpose: Displays the manufacturing record for the
access point. Use the MR command to
display the MAC address, configuration
string, and serial number for your access
point.
Syntax: MR
SR
Purpose: Sets the baud rate of the access point.
Syntax: SR z
where z is the baud rate. You must enter the baud rate as a whole
number with no commas. For example, to enter a baud rate of
19,200, you must enter
19200.
You can also set the baud rate to autobaud, which lets the access
point set its baud rate to match the baud rate of your terminal.
Type
SR 0 and press <Enter> twice.