Allied Telesis AT-WA7500 - Manual (Page 76)

3 - Configuring the Ethernet Network
76
Example 1
This example shows you how to use Ethernet filters to filter all traffic that
passes through the access point to the wireless network except for traffic
for specified MAC addresses. These filters do not prevent wireless traffic
from reaching the Ethernet network. For this example, set these filter
values.
Table 11 Example 1 - Filter Values
Value ID Value Description
1 ff ff ff ff ff ff Allows multicast traffic to enter the wireless network,
which is necessary for IP end devices to communicate
2 00 02 2d 04 b7 a4 The MAC address of an end device you want to be able
to communicate.
3 00 02 2d 0d 54 25 The MAC address of an end device you want to be able
to communicate.