Upgrading the access points – Allied Telesis AT-WA7500 User Manual
Page 217
AT-WA7500 User’s Guide
217
Upgrading the Access Points
For optimal performance, you should install the most current software
version on all the access points in your network. To upgrade the
software, you must copy the software release to your PC, and then you
can upload the release to your root access point and other access points.
However, you can also configure the root access point to copy the
release to all other access points in its spanning tree.
You can upgrade the access point software using:
a web browser interface. For help, see Using a Web Browser
To copy the software release to your PC
1. Using a web browser, navigate to www.alliedtelesyn.com.
2. From the Service & Support choose Downloads.
3. Select AT-WA7500.
4. Select the software link to save the upgrade file on your PC.