Allied Telesis AT-S60 - Manual (Page 175)

Chapter 11: File Downloads and Uploads
Section II: Local and Telnet Management 174
Uploading an Image File Using TFTP
To upload an image file using TFTP, perform the following procedure:
1. If you are using a Telnet management session, go to step 2. If you are
using a local management session, type T at the prompt displayed in
Step 4 in the procedure that begins on page 168.
The following prompt is displayed:
TFTP Server IP address:
2. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
3. Enter the file name of the image file that you want to upload.
Note
The file you are uploading must be stored in the upload directory of
the TFTP server.
Once a file name has been specified, the upload begins. When the
TFTP upload is complete, the following message is displayed:
File successfully sent!
Press any key to continue...
4. Press any key.
The Downloads & Uploads menu is displayed, as shown in Figure
53 on page 169.