Allied Telesis AT-S60 - Manual (Page 261)

Chapter 13: Virtual LANs
Section II: Local and Telnet Management 260
Creating a Port-based or Tagged VLAN
To create a new port-based or tagged VLAN, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
The VLAN Menu is shown in Figure 91 on page 257.
2. From the VLAN Menu, type 1 to select Configure VLAN.
The Configure VLAN Menu is shown in Figure 94.
Figure 94 Configure VLAN Menu
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 01-Jan-2003
Configure VLAN
1 - Set Management VLAN ID ............. 1 (Default_VLAN)
2 - Set VLAN Mode ...................... User Configured
3 - Set Uplink Port .................... None
4 - Configure Port Based VLAN
D - Reset to Default VLAN
R - Return to Previous Menu
Enter your selection?