Using telnet to access the switch, To use telnet to access a remote switch (example), Enter the telnet command and the ip address at – Allied Telesis FORMULA 8200 User Manual

Page 30: Enter admin at the login prompt, Enter the password at the password prompt. (if, Use the exit command to log out from the cli se, The exit command does not end the telnet session, Using telnet to access the switch -14

Advertising
Using telnet to access the switch, To use telnet to access a remote switch (example), Enter the telnet command and the ip address at | Enter admin at the login prompt, Enter the password at the password prompt. (if, Use the exit command to log out from the cli se, The exit command does not end the telnet session, Using telnet to access the switch -14 | Allied Telesis FORMULA 8200 User Manual | Page 30 / 164 Using telnet to access the switch, To use telnet to access a remote switch (example), Enter the telnet command and the ip address at | Enter admin at the login prompt, Enter the password at the password prompt. (if, Use the exit command to log out from the cli se, The exit command does not end the telnet session, Using telnet to access the switch -14 | Allied Telesis FORMULA 8200 User Manual | Page 30 / 164
Advertising
See also other documents in the category Allied Telesis Computer hardware: