Preface – Allied Telesis FORMULA 8200 User Manual
Page 7
vii
Preface
This guide includes information about configuring and operating
Allied Telesyn International Corp.’s FORMULA 8200™ 10/100 Mbps
Fast Ethernet Workgroup Switch with any of the following
configurations:
❑
AT-8208 or AT-8216, the FORMULA 8200 switch with either 8
or 16 10/100 Mbps TX ports with firmware version 1.4.3 or later
❑
AT-8208F/SC or AT-8216F/SC, the FORMULA 8200 switch with
either 8 or 16 100 Mbps FX ports with firmware version 1.4.3 or
later
❑
Any of the above switch models with one of the following
uplink cards:
— AT-8202 ATM uplink card
— AT-8203 FDDI uplink card
This guide assumes that a FORMULA 8200 switch has been installed
and is operational. For more information on installing the switch,
refer to the
FORMULA 8200 Installation Guide
.