Allied Telesis FORMULA 8200 - Manual (Page 120)

Command Reference
5-42
VBRIDGE Command
Syntax
VBRIDGE
VBRIDGE/CONFIG <subcommand>
VBRIDGE/SHOW <subcommand>
Menu
Description
The VBRIDGE command allows you to configure and display the
virtual bridge parameters. Table 5-15 describes the parameters in the
display.
/ >vbridge
== VBRIDGE MENU ==
[CONFIG] [SHOW]
Table 5-15 VBRIDGE Command Parameters
Subcommand Alias Description
CONFIG BRIDGE cvb Configures a virtual bridge.
THROTTLE ctb Control dlf throttle
FILTER ADD addfl Adds a static filter table entry.
DELETE delfl Deletes a static filter table entry.
PARAPORT vbpa Sets virtual bridge port parameters.
SHOW BRIDGE vvb Shows a virtual bridge.
FILTER ALL fl Shows all entries in the static filter table.
FWT vfwt Shows the virtual bridge forwarding table.
PORT vvbp Shows the virtual bridge port parameters for a
VLAN.