Allied Telesis FORMULA 8200 - Manual (Page 10)

Preface
x
Document Conventions Used in This Guide
This section describes the typographic conventions used in this
guide.
Note
The command line interface (CLI) portion of the FORMULA 8200 is not
case sensitive; however, this manual shows commands in uppercase
letters. You may type your commands in either uppercase or
lowercase, as shown in some of the examples.
This guide uses the following symbols to highlight special messages:
Note
A note includes information of importance or special interest.
Caution
A caution includes information that will help you prevent equipment
failure or loss of data .
Example Meaning
Local IP configuration :
The VLAN/CONFIG/CREATE command is used
to configure a VLAN.
Enter BRIDGE <VLAN#> .
Press the [Enter] key to execute a command.
System prompts and messages are shown in
COURIER font..
Commands or other input the user must supply are
shown in
BOLDFACE capital letters.
Text in angle brackets after a command indicates user-
defined input must follow the command. (Example:
BRIDGE 2 )
Keys named in text are shown enclosed in square
brackets. (
[Enter] is used to denote both the Enter
key and the Return key.)
Read Chapter 6 in the User Guide . Book titles are shown in italic type.
To install the switch on a
flat surface:
1. User action
2. User action
The Procedure icon denotes a series of numbered
steps the user must perform. Each step may be
followed by text that explains the result of the user
action.