Allied Telesis FORMULA 8200 - Manual (Page 105)

FORMULA 8200 User’s Guide
5-27
INET Command
Syntax
INET/CONFIG/<subcommand>
INET/PING
INET/RLOGIN
INET/SHOW/<subcommand>
INET/STATS/<subcommand>
Menu
Description
The INET command allows you to display and configure IP
parameters for the switch.
Table 5-8 describes the parameters in the display.
/inet
== INET MENU ==
[CONFIG] PING RLOGIN
[SHOW] [STATS]
Table 5-8 INET Command Parameters
Subcommand Alias Description
CONFIG ROUTE cir Menu to configure a static route.
ADD cira Add a static route.
DEFAULT ciradr Set the default route.
DELETE cird Delete a static route.
RMDEFAULT cirdr Remove the default route.
IPR Configure IP routing mode.
PING ping Ping another machine via IP address.
RLOGIN rlogin Log in to a remote machine.
SHOW ARP varp Show ARP table entries.
ROUTE vir Show routing information.
STATIC vis Show static routes.
ICONNECT vcon Show TCP/UDP connection table.
RTCACHE virc Show route cache.