Allied Telesis FORMULA 8200 - Manual (Page 89)

FORMULA 8200 User’s Guide
5-11
BOOT/IP/CONFIG Example
To assign a new IP address:
1. Enter the following command:
BOOT/IP/CONFIG
2. Enter the information after each prompt, or press [Enter] to keep
the default.
The following screen is an example of the prompts:
BOOT/UPDATE/SYSTEM Example
To update the system and VLAN configuration to flash:
Enter the following command:
BOOT/UPDATE/SYSTEM
The following display appears:
/BOOT >ip/config
Local IP configuration:
IP address (137.168.24.190) :149.35.101.31
Local host name () :
Default gateway (0.0.0.0) :
Net mask (255.255.255.0) :
OK to write config to flash (y/n) ?
/BOOT/IP >
/BOOT/UPDATE >system
Updating system/VLAN configuration....
/BOOT/UPDATE >