Allied Telesis FORMULA 8200 - Manual (Page 57)

FORMULA 8200 User’s Guide
4-11
This displays both the monitor port as well as the port to be
monitored. In the following example, port 1 is set to monitor
port 6’s receive (rx) traffic of the unicast type:
6. View the mirrored information by entering:
ETHERNET/SHOW/STAT <PORT#>
where <PORT#> is the number of the snoop port.
To clear a snoop port:
1. Enter ETHERNET/CONFIG/SETSNOOP <SNOOP PORT# 0 0> to
remove the flag from the snoop port.
2. Enter the following command:
ETHERNET/CONFIG/RXMIRROR
The following prompt is displayed:
3. Enter D (uppercase) for Disable.
4. Enter ETHERNET/CONFIG/SNOOPMIRROR to make sure the
display does not show any ports in the snoop mirror
configuration.
/ETHERNET/CONFIG/SNOOPMIRROR
Snoop port: 1 RX
RX unicast: 6
RX broadcast
RX discarded:
RX ARL:
TX unicast &
broadcast:
TX ARL:
Monitor or “snoop” port = 1
Port to monitor = 6
Communication = receive
Traffic type = unicast
>/ethernet/config/rxmirror
Enter the mirror types, any combination of
u=unicast, b=broadcast, d=discarded, a= ARL,D=Disable: