Nikon D4S - Manual (Page 229)

207
l
At values other than ±0.0, a Y icon will be displayed in the top
control panel and E will be displayed in the viewfinder after you
release the
M button. The current value for flash compensation can
be confirmed by pressing the M button.
Normal flash output can be restored by setting flash
compensation to ±0.0. Flash compensation is not reset when the
camera is turned off.
A
Optional Flash Units
The flash compensation selected with the optional flash unit is added to
the flash compensation selected with the camera.
A
See Also
For information on choosing the size of the increments available for
flash compensation, see Custom Setting b3 (Exp./flash comp. step
value,
0 321). For information on choosing whether flash
compensation is applied in addition to exposure compensation when
the flash is used, see Custom Setting e4 (Exposure comp. for flash,
0 333). For information on automatically varying flash level over a
series of shots, see page 140.