Nikon D4S - Manual (Page 302)

280
Q
Connecting the Printer
Connect the camera using the supplied USB cable.
1
Turn the camera off.
2
Connect the USB cable.
Turn the printer on and connect the USB cable. Do not use
force or attempt to insert the connectors at an angle.
3
Turn the camera on.
A welcome screen will be displayed in the monitor, followed
by a PictBridge playback display. To print pictures one at a
time, follow the steps below. To print multiple selected
pictures or all pictures, proceed to page 282.
Printing Pictures One at a Time
1
Display the desired picture.
Press 4 or 2 to view additional pictures. Press the X button to
zoom in on the current frame ( 0 253, press K to exit zoom).
To view six pictures at a time, press the center of the multi
selector. Use the multi selector to highlight pictures, or press
the center of the multi selector again to display the
highlighted picture full frame. To view images in other
locations, press
W when thumbnails are displayed and select
the desired card and folder as described on page 242.
D
USB Hubs
Connect the camera directly to the printer; do not connect the
cable via a USB hub.