Nikon D4S - Manual (Page 236)

214
t
Multiple Exposure
Follow the steps below to record a series of two to ten exposures
in a single photograph. Multiple exposures can make use of RAW
data from the camera image sensor to produce colors noticeably
superior to those in software-generated photographic overlays.
❚❚Creating a Multiple Exposure
Multiple exposures can not be recorded in live view. Exit live view
before proceeding. Note that at default settings, shooting will end
and a multiple exposure will be recorded automatically if no
operations are performed for 30 s.
1
Select Multiple
exposure in the
shooting menu.
Press the G button to
display the menus.
Highlight Multiple
exposure in the shooting
menu and press
2.
A
Extended Recording Times
For an interval between exposures of more than 30 s, extend the meter-
off delay using Custom Setting c2 (Standby timer,
0 324). The
maximum interval between exposures is 30 s longer than the option
selected for Custom Setting c2. If no operations are performed for 30 s
after the monitor has turned off during playback or menu operations,
shooting will end and a multiple exposure will be created from the
exposures that have been recorded to that point.
G button