Nikon D4S - Manual (Page 447)

425
n
5
Close the clock battery chamber.
Slide the clock battery chamber cover
towards the back of the main battery
chamber until it clicks into place.
6
Replace the main battery.
Reinsert the EN-EL18a.
7
Set the camera clock.
Set the camera to the current date and
time (
0 30). Until the date and time have
been set, the B icon will flash in the top
control panel.
A
CAUTION
Use only CR1616 lithium batteries. Using another type of battery could
cause an explosion. Dispose of used batteries as directed.
D
Inserting the Clock Battery
Insert the clock battery in the correct orientation. Inserting the battery
incorrectly could not only prevent the clock from functioning but could
damage the camera.