Nikon D4S - Manual (Page 56)

34
s
4
Close the card slot cover.
If this is the first time the memory card
will be used after being used or
formatted in another device, format the
card as described on page 35.
A
Memory Card Icons
The memory cards currently inserted in the
camera are indicated as shown (the example at
right shows the icons displayed when both an
XQD and a CompactFlash card are inserted). If
the memory card is full or an error has occurred,
the icon for the affected card will flash (
0 446).
Top control panel
A
Using Two Memory Cards
When two memory cards are inserted, you can choose either of the two
to serve as the primary card (
0 41) and select the role played by the
remaining card ( 0 96).
A
Removing Memory Cards
After confirming that the memory card access lamp is off, turn the
camera off and open the memory card slot cover.
XQD memory cards : Press the card in to eject it (q).
The memory card can then be removed by hand.
CompactFlash memory cards : Press the eject button
(q) to partially eject the card (w). The memory
card can then be removed by hand. Do not push
on the memory card while pressing the eject
button. Failure to observe this precaution could
damage the camera or memory card.