Nikon S6200 - Manual (Page 171)

E 65
The Setup Menu
Re
fere
nce
S
ect
io
n
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (
A 21).
This setting determines the amount of time that passes before the camera enters
standby mode. You can select 30 s, 1 min (default setting), 5 min, or 30 min.
d button M z tab M Auto off
C
When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for approximately another three minutes, the camera will turn off
automatically.
• When the power-on lamp is blinking, pressing any of the following buttons will turn the monitor
back on:
Power switch, shutter-release button, A button,
c button, or b (e movie-record) button
C
Notes About Auto Off
The time that passes before the camera enters standby mode is fixed in the following situations:
• When a menu is displayed: 3 minutes
• During slide show playback: Up to 30 minutes
• When the AC adapter EH-62F is connected: 30 minutes