Nikon S6200 - Manual (Page 65)

49
Sh
ooting Feat
ures
Smart Portrait Mode (Shooting Smiling Faces)
When the camera detects a smiling face, you can take a picture automatically
without pressing the shutter-release button (smile timer). You can use the skin
softening option to smooth the skin tones in human faces.
1
Without pressing the shutter-release button,
frame the picture and wait for the subject to smile.
• When the camera detects a human face, a yellow
double border (focus area) is displayed around that face.
When the camera has focused on that face, the double
border will turn green for a moment and focus is locked.
• Up to three faces can be detected. When the camera
detects more than one face, a double border is
displayed around the face closest to the center of the frame, and single borders are
displayed around the other faces.
• If the camera detects that the face framed by the double border is smiling, the Smile
timer (
A 50) feature is activated and the shutter is automatically released.
• After the camera releases the shutter, it will continue to detect faces and smiles, and
will release the shutter again if it detects a smiling face.
2
Shooting ends.
• Any one of the following operations can be used to cancel smile detection and stop
shooting.
- Turn the camera off.
- Set Smile timer (
A 50) to Off.
- Press the A button and select a different shooting mode.
Enter shooting mode M A (shooting mode) button M F Smart portrait mode (A 24-25)
F 3.2 F 3.2 1 / 2 5 0 1 / 2 5 0
B
Notes About Smart Portrait Mode
• Digital zoom cannot be used.
• Under some shooting conditions, the camera may be unable to detect faces or detect smiles.
• See “Notes About Face Detection” (
A 67) for more information.
C
Auto Power Off in Smile Timer Mode
When Smile timer is set to On, the auto power off function ( A 89) is activated and the camera turns
off when either of the situations indicated below persists and no other operations are performed.
• The camera does not detect any faces.
• The camera detected a face, but cannot detect a smile.
C
When the Self-timer Lamp Blinks
When using smile timer, the self-timer lamp blinks when the camera detects a face and flickers
immediately after the shutter is released.
C
Releasing the Shutter Manually
The shutter can also be released by pressing the shutter-release button. If no faces are detected, the
camera focuses on the subject at the center of the frame.