Error messages – Nikon S6200 User Manual
Page 185
E
79
Re
fere
nce
S
ect
io
n
Error Messages
Display
Problem
Solution
A
O (blinks)
Clock not set.
Set date and time.
N
Battery exhausted.
Battery exhausted.
Charge or replace battery.
P
Battery temperature
high
Battery temperature is
high.
Turn off camera, and allow
battery to cool down before
resuming use. After five
seconds, this message will
disappear, the monitor will
turn off, and the power-on
lamp will blink rapidly. After
the lamp blinks for three
minutes, the camera will turn
off automatically. Pressing the
power switch also turns off
the camera.
Q (
● blinks red)
Camera cannot focus.
• Refocus.
• Use focus lock.
P
Please wait for the
camera to finish
recording.
Camera cannot perform
other operations until
saving is complete.
Wait until message clears
from display automatically
when saving is complete.
–
u
Memory card is write
protected.
Write-protect switch is
in “lock” position.
Slide write-protect switch to
“write” position.
–
P
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that terminals are
clean.
• Confirm that memory card
is correctly inserted.
P
This card cannot be
read.
P
Card is not formatted.
Format card?
Yes
No
Memory card has not
been formatted for use
in COOLPIX S6200.
Formatting deletes all data
saved on the memory card. Be
sure to select No and make
copies of any images which
need to be kept before
formatting the memory card.
Select Yes and press the
k
button to format the memory
card.