Charge by computer, E69) – Nikon S6200 User Manual

Page 175

Advertising
background image

E

69

The Setup Menu

Re

fere

nce
S

ect

io

n

Charge by Computer

Select whether or not the battery inserted into the camera is charged when the
camera is connected to a computer via the USB cable (

A 74).

B

Notes About Connecting the Camera to a Printer

The battery cannot be charged with connection to a printer, even if the printer complies with the

PictBridge standard.

When Auto is selected for Charge by computer, it may be impossible to print images with direct

connection of the camera to some printers. If the PictBridge startup screen is not displayed in the
monitor after the camera is connected to a printer and turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the
printer.

B

Notes About Charging with Connection to a Computer

The battery cannot be charged, nor can data be transferred, when the camera is connected to a

computer before the camera’s display language and date and time have been set (

A 22). If the

camera’s clock battery (

A 23) has been exhausted, the date and time must be reset before the

battery can be charged or images can be transferred with connection to a computer. In this case,
use the Charging AC Adapter EH-69P (

A 16) to charge the battery and then set the camera’s date

and time.

If the camera is turned off, charging will also stop.
If the computer enters sleep mode while charging, charging will stop and the camera may be

turned off.

When disconnecting the camera from the computer, turn the camera off and then disconnect the

USB cable.

About 3 hours and 50 minutes are required to charge a fully exhausted battery. Charging time

increases when images are transferred while the battery is charging.

When the camera is connected to a computer, an application installed on the computer, such as

Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of
charging the battery, exit the application.

The camera turns off automatically if there is no communication with the computer for 30 minutes

after the battery has finished charging.

Depending upon computer specifications, settings, and power supply and allocation, it may be

impossible to charge the battery using a computer connection while it is inserted into the camera.

d button M z tab M Charge by computer

Option

Description

Auto
(default setting)

When the camera is connected to a computer that is running,
the battery inserted into the camera is automatically charged
using power supplied by the computer.

Off

The battery inserted into the camera is not charged when the
camera is connected to a computer.

Advertising