Nikon 775 User Manual
Page 106
92
Ref
e
rence–Be
y
ond P
o
int-and-Shoot
Throwing Light on Your Subject: The Flash Button
The flash can be adjusted for a variety of situations, as described in the table opposite
under the heading, “When to Use It.”
To select a flash setting, press the
button, which may be found below the moni-
tor on the back of the camera.
2
Confirm flash setting in monitor
NORMAL
NORMAL
[
10
10
]
1
Press
When Lighting Is Poor
When lighting is poor and the flash is off (
) or set to slow sync (
), photos may be
blurred. Use of a tripod is recommended in these circumstances. When there is very little
light available, the flash-mode indicator (
or
) in the monitor will turn yellow. Pictures
taken when this indicator appears may be blurred or slightly mottled. To prevent this, tr y
zooming the camera out.
Note that the flash will turn off (
) automatically when:
• Autofocus is set to “Infinity” (
;
87)
• The mode dial is set to
(landscape),
(sunset), or
(movie)
• BSS is on (
104) or a setting other than Single is selected for CONTINUOUS (
102) in auto mode
For more information on:
iv
Safe flash use