Nikon 775 - Manual (Page 162)

148
Ref
erence–Connections
Disconnecting the Camera
When you want to disconnect the camera from the computer, follow the instructions below
before turning the camera off or disconnecting the USB cable.
Windows Millenium Edition / Windows 2000
Click the “Unplug or eject hardware” icon in the taskbar
and select Stop USB Disk from the menu that appears. If
this step is not performed before the camera is discon-
nected or turned off, a warning will be displayed. Click OK
to clear the warning from the screen.
Windows 98 / Windows 98SE
Double click the My Computer icon, and right click the removable disk corresponding to
the camera. Select Eject from the menu that appears.
Macintosh
Drag the “untitled” volume representing the camera to the
Trash.
When a transfer error occurs, messages such as “TRANSFER ERROR” or “COMMUNICA-
TION ERROR” will appear in the montior. The error message may be followed by the
messasge “TRANSFER COMPLETED”, although note that transfer is NOT complete when
an error occurs. Remember to follow the above disconnection procedure when discon-
necting the camera after a transfer error.
Formatting Memory Cards
If a memor y card inser ted into the camera formatted using Explorer or My Computer
(Windows), or Erase Disk is selected from the Special menu (Macintosh), all images on the
card will be deleted.