Nikon 775 - Manual (Page 161)

147
Ref
erence–Connections
5 Press the TRANSFER button
Once the camera is turned on, Nikon View will au-
tomatically detect the camera. After Nikon View
has started, press the TRANSFER button on the
camera to copy all mar ked images from the
memory card to the computer. The message “PRE-
PARING TO TRANSFER” will appear in the camera
monitor. After a brief pause, transfer will begin, and
the message “TRANSFERRING IMAGE TO COM-
PUTER” will be displayed.
6 Disconnect the camera
When all mar ked images have been transferred,
the monitor will show “TRANSFER COMPLETED.”
Before disconnecting the cable or turning the cam-
era off, you must remove the camera from the sys-
tem as described below.
Interrupting Transfer
To end transfer before all marked pictures have been copied to the computer, click the
Cancel button in the Nikon View transfer progress dialog. The message, “TRANSFER CAN-
CELLED” will appear in the camera monitor. Even though the message “TRANSFER COM-
PLETED” may appear after transfer has been cancelled, transfer has not been successfully
completed.
For more information on:
59 Marking images for transfer as they are taken
122 Marking images for transfer after they are taken
PREPARING
TO TRANSFER
TRANSFERRING
IMAGE TO
COMPUTER
TRANSFER COMPLETED