Nikon 775 - Manual (Page 3)

iii
Do not disassemble
Touching the product’s internal par ts could result in injury. In the event of a
malfunction, the product should be repaired only by a qualified technician. Should
the product break open as the result of a fall or other accident, remove the
battery and/or AC adapter and then take the product to a Nikon-author ized
service center for inspection.
Observe proper precautions when handling batteries
Batteries may leak or explode if improperly handled. Observe the following
precautions when handling batteries for use in this product:
• Be sure the product is off before replacing the battery. If you are using an AC
adapter, be sure it is unplugged.
• Use only the supplied Nikon EN-EL1 lithium-ion battery or a 6V 2CR5 (DL245)
lithium battery (available separately).
• When inser ting the battery, do not attempt to inser t it upside down or back-
wards.
• Do not shor t or disassemble the battery.
• Do not expose the batter y to flame or to excessive heat.
• Do not immerse in or expose to water.
• Do not transpor t or store with metal objects such as necklaces or hairpins.
• Batteries are prone to leakage when fully discharged. To avoid damage to the
product, be sure to remove the batter y when no charge remains.
• When the batter y is not in use, attach the terminal cover and store in a cool
place.
• Immediately after use, or when the product is used on battery power for an
extended period, the battery may become hot. Before removing the battery,
tur n the camera off and allow the batter y to cool.
• When used with a 2CR5 (DL245) lithium batter y, the camera grip may be-
come noticeably warm, but this does not indicate a malfunction.
• Discontinue use immediately should you notice any changes in the battery,
such as discoloration or defor mation.