Nikon 775 - Manual (Page 49)

35
T
u
torial–First Steps
Removing the Battery
The battery can be removed without affecting pictures stored on the memor y
card. All settings other than date and language will, however, be reset.
Alternative Power Sources
Although the COOLPIX775 can be used with non-rechargeable 2CR5 (DL245)
lithium batteries, available at a variety of retail outlets, we recommend the re-
chargeable Nikon EN-EL
1 Li-ion battery supplied with your camera. This lithium-
ion battery, for use exclusively with COOLPIX775, 880, and 995 digital cameras,
can be recharged in the battery charger provided with your camera. To power
your camera continuously for extended playback or similar tasks, you can use the
EH-21 (available separately), an AC adapter that doubles as a battery charger for
the EN-EL
1 .
Connecting the camera to the AC adapter EH-21
The COOLPIX775 can be connected to your house-
hold mains electricity supply (100AV) via the AC
adapter EH-21. Connect the adapter’s DC plug to
the COOLPIX775 DC-IN connector, then connect
the adapter to the mains socket. When connecting
the camera as described above, beware of the fol-
lowing points:
• Turn the camera off before disconnecting the DC plug from the camera
• Do not plug any appliances other than the EH-21 AC adapter into the DC-IN
connector
• The camera and the adapter may both become warm when connected for an
extended period of time, but this does not indicate a malfunction
• The EN-EL 1 Li-ion battery can not be recharged while inserted into the camera.
It must be removed and placed in the AC adapter / battery charger.