Nikon 775 User Manual
Page 153
139
Ref
erence–Pla
y
ing Imag
es Back
Television Playback: Connecting Your Camera to a Video Device
Using the EG-775 video cable provided with your camer a, you can connect the
COOLPIX775 to a television or VCR. The video device will show the same picture
as is displayed in the camera monitor.
1
Connect the video cable to the camera
Insert the black plug on the EG-775 into the
camera’s interface connector.
2
Connect the video cable to the video device
Connect the yellow plug to the video-in jack on
the television or VCR.
3
Tune the television to the video channel
4
Turn the camera on
The television will mirror the image in the cam-
era monitor.
Use an AC Adapter
To prevent the display in the television from turning off whenever the camera enters sleep
mode, connect the camera to an EH-2
1
AC adapter/battery charger (available separately).
Note, however, that camera settings and photo info will not be displayed on the television
screen when the camera monitor is off.
Choosing a Video Mode (
119)
The Video Mode item in the SETUP menu offers a choice of NTSC and PAL standards for
video output. Be sure that the standard selected matches that of any video device to which
you connect the camera.
PAL Video Mode (
119)
At a setting of PAL, the monitor will turn off when a video cable is connected. In movie
mode, however, the monitor will turn on and output to the video de vice will be suspended.