Nikon 775 - Manual (Page 159)

145
Ref
erence–Connections
3 Connect the interface cable to the
computer
Connect the other end of the cable to the
computer as shown at right.
4 Connect the interface cable to the
camera
Connect the UC-E2 USB cable to the
camera’s interface connector. While the in-
terface cable is connected, the monitor will
be off and all controls except the power
switch and TRANSFER button disabled.
Connect the Camera Directly to the Computer
The camera may not function as expected when connected via a USB hub or keyboard.
Register the Camera with the System (Windows)
The first time the camera is connected to a Windows computer, the camera must be “regis-
tered” with the system so that the computer will know how to communicate with the
camera. If you are using Windows Millennium Edition (Me) or Windows 2000, the computer
will register the camera automatically the first time the camera is connected. The files
needed to register the camera with Windows 98/98 Second Edition (SE) is contained on the
Nikon View installer CD. Be sure the CD is inserted in the drive when you first connect
your camera. Other versions of Windows do not support USB. More information on
registering your camera can be found in Nikon View Reference Manual.