elektraLite CP10xt Manual - Manual (Page 15)

12
chase. Repeat the above with fixtures OTHER THAN THE ONES previously used. Press “Chase #
Go” to start the first chase. Press “Chase # Go” to start the second chase. If programmed correctly
the result will be both chases running together at their programmed chase speed and Xfade time.
Altering the chase speed and the Xfade time will affect only the most recently activated chase. To
stop the chases press “Black”. Up to 3 chases maybe run together. Trying to run a fourth chase will
display the message “3 chases running” in the LCD display.