elektraLite CP10xt Manual - Manual (Page 19)

16
Fast Hold Time
Programming a macro step with a hold time of 0 seconds will give you an actual hold time of .25
seconds. This allows you to program macro steps which quickly refocus a fixture with the lamp off to
achieve a dramatic effect. To do this, program a cue which focuses the beam on the desired subject.
Copy this cue to another cue number but with the lamp turned off. In your macro call the cue with
the lamp off with a hold time of 0. With the next step of the macro call the cue with the lamp turned
on giving it a longer hold time. This will create the effect of a beam which appears rather than moves
across the stage.