Sony NWZ-X1051F - Manual (Page 129)

Common Settings
NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)
1 1
Notes
 For the information on the WPS settings of your access point, refer to the operation
guide of the access point.
 After WPS setting for wireless LAN connection between the player and access point, the
access point may become unconnectable to devices that were previously connected. For
details, refer to the operation guide of the access point.
 For the information on the settings of the access point, refer to the operation guide of
the access point, consult the administrator of the access point, or consult the public
Internet access service provider.
 You can register up to 32 access points.
 If you begin the new registration using Push-Button method or PIN method during
connecting to a wireless LAN, the connection is disconnected.
Scan Results screen
When you select “Scan Wireless LANs” from the New Registration screen, the
list of access points installed within the communication range appears.
The following information is displayed for each access point.
Item Description
The strength of the radio wave of the access point is displayed.
SSID The SSID of the access point is displayed.
When the access point is set to use an encryption method, is
displayed.

Select the desired access point  “Next.”
The IP Address Settings screen ( page 131) appears.
 If you select the access point indicated with , the Enter Encryption Key
screen ( page 131) appears.
 You can search access points again and refresh the list by selecting
“Scan.”
Note
 Access points that are set to hide their SSID do not appear in the list. Select “Back” to
return to the New Registration screen, then select “Manual Registration” to set up
manually ( page 128).
Continued 
Table of
Cont
ents
Inde
x