Table of cont ents inde x – Sony NWZ-X1051F User Manual
Page 156
Troubleshooting
NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)
156
156
Symptom
Cause/Remedy
You are positioned within
a wireless LAN and it is
available, but the icon of
the Select Access Point
screen indicates no signal
strength.
The wireless LAN status is renewed when the Select Access
Point screen is brought up or “Scan” is tapped.
Select “Scan” on the Select Access Point screen.
Some applications cannot
use the wireless LAN
function.
Some public wireless LAN access points limit the usage of the
service until you enter the user ID and password at the
provider’s website by using the Internet browser.
Check the public wireless LAN service’s usage.
Some public wireless LAN access points restrict the use of
some kind of the Internet service.
Connect to another access point.
The access point you
intend to connect to does
not appear in the Select
Access Point screen.
The access point you want to use is set to make its SSID
invisible to users.
In this case, the access point may not be shown on the
wireless network access point list. Enter the SSID manually
The antenna icon indicates
sufficient signal strength,
but the player cannot
connect to the Internet.
The server you attempt to connect to may be currently
unavailable.
Wait for a while and try again.
Continued
Wireless LAN (continued)
Table of
Cont
ents
Inde
x