Transferring music/videos/photos/podcasts, Transferring music/videos/photos, Podcasts – Sony NWZ-X1051F User Manual

Page 28

Advertising
background image

Preparing the Player

NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)





Transferring Music/Videos/Photos/Podcasts

You can directly transfer data by drag-and-drop using Windows Explorer on

your computer.

Playable data hierarchy has rules. To transfer data properly, see the following

instructions.

For details about the bundled software that can transfer data, see  page 22.

Hints

 Some computers that already have Windows Media Player 10 installed may encounter

file limitations (AAC, video files, etc.) when transferring by drag-and-drop. If you install

Windows Media Player 11 (for details, see “Installing the Operation Guide and software”

of “Quick Start Guide”) from the supplied CD-ROM, you can solve this problem, then

you can transfer by drag-and-drop again. Before installing Windows Media Player 11 on

your computer, make sure to check whether your software or service corresponds to

Windows Media Player 11.

 Data hierarchy may differ, depending on your computer environment.

 Some WMV files can be played back only by transferring using Windows Media Player

11.

Notes

 Do not disconnect the USB cable while “Do not disconnect.” appears on the player, or

the data being transferred may be damaged.

 If you turn on or restart the computer while the player is connected to the computer, the

player may malfunction. In this case, press the RESET button of the player to reset it (

page 143). Disconnect the player from the computer before turn on or restart the

computer.

 You cannot change the following folder names or delete them: “MUSIC,” “MP_ROOT,”

“MPE_ROOT,” “VIDEO,” “PICTURES,” “PICTURE,” “DCIM,” “PODCASTS” and

“FEEDS.”

 Do not change the folder or file names directly under the “MP_ROOT” folder or “MPE_

ROOT” folder. Otherwise, they will not be displayed on the player.

Connect the player to your computer using the supplied USB

cable.
Insert the connector of the USB cable into the player with the mark

facing up.

Select the player on Windows Explorer, and then drag and drop

files.
The player appears on Windows Explorer as [WALKMAN].

Continued

Table of

Cont

ents

Inde
x

Advertising
This manual is related to the following products: