Sony NWZ-X1051F - Manual (Page 34)

Preparing the Player
NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)
 
Connecting to a wireless LAN
To connect to a wireless LAN, select the desired access point from a list, then
enter the encryption key if necessary.
Usually, when the connection is required by the Internet browser, YouTube or
Podcast, the connection confirmation screen appears automatically to connect
to a wireless LAN. The following instructions use the Internet browser as an
example. Move within the communication range of the access point you intend
to connect to before beginning the operation.
To connect to an access point by using the WPS method, see “New
Registration” ( page 128).
Notes
 To connect to an access point using the WPS method, refer to “New Registration” (
page 128) to register the access point before connecting to it.
 Set the “WLAN Function On/Off” option to “On” before connecting to a wireless LAN
( page 127). The default setting is “Off.”
HOME button
Internet Browser

From the Home menu, select (Internet Browser).
The connection confirmation screen appears.

Select “Yes.”
The Select Access Point screen appears.
 On the screen, registered access points and
access points that are installed within the
communication range of the player are
displayed in a list.
Yes
Continued 
Table of
Cont
ents
Inde
x