Changing the fm radio settings, Scan sensitivity, Mono/auto – Sony NWZ-X1051F User Manual
Page 75
Listening to FM Radio
NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)
Changing the FM Radio Settings
To change the FM radio settings, select (Settings) from the Home menu,
then select “FM Radio Settings.”
HOME button
Settings
Scan Sensitivity
When you select stations using the “Auto Preset” function ( page 73) or
tapping / , the FM receiver may receive many unwanted broadcast stations
because sensitivity is too high. In this case, set the reception to “Low.” “High” is
set by default.
From the Home menu, select (Settings)
“FM Radio Settings”
“Scan Sensitivity”
“Low”
“OK.”
To set the reception sensitivity back to the default, select “High.”
Mono/Auto
If noise occurs during FM reception, set the receiver to “Mono” for monaural.
If you set it to “Auto,” monaural/stereo reception is selected automatically,
depending on reception conditions. “Auto” is set by default.
From the Home menu, select (Settings)
“FM Radio Settings”
“Mono/Auto”
“Mono”
“OK.”
To return to the automatic setting, select “Auto.”
Table of
Cont
ents
Inde
x