Avaya P332G-ML - Manual (Page 100)

Chapter 12 Avaya P330 Layer 3 Features
86 Avaya P332G-ML User’s Guide
IP Configuration
IP Configuration CLI Commands
In order to... Use the following command...
Enable IP routing ip routing
Set ICMP error messages ip icmp-errors
Specify the format of netmasks in
the show command output ip netmask-format
Create and/or enter the Interface
Configuration Mode interface
Assign an IP address and mask to
an interface ip address
Set the administrative state of an IP
interface ip admin-state
Update the interface broadcast
address ip broadcast-address
Define a default gateway (router) ip default-gateway
Define the interface RIP route
metric value default-metric
Enable net-directed broadcast
forwarding ip directed-broadcast
Set the IP routing mode of the
interface ip routing-mode
Enable or disable the sending of
redirect messages on the interface ip redirect
Check host reachability and
network connectivity ping
Trace route utility traceroute
Create a router Layer 2 interface set vlan (Layer 3)
Specify the VLAN on which an IP
interface resides ip vlan/ip vlan name