Avaya P332G-ML - Manual (Page 127)

Chapter 12 Avaya P330 Layer 3 Features
Avaya P332G-ML User’s Guide 113
Policy Configuration CLI Commands
In order to... Use the following command...
Set the default action for a given
Policy List. ip access-default-action
Create an access-list rule in a
specific Access List. ip access-list
Set the source list, destination list,
and destination module for copying
an entire Policy List ip access-list-copy
Set the DSCP-to-COS mapping.
Based on range and action
parameters, system will apply
mapping to frames ip access-list-dscp operation
Designates which original frame
fields influence internal queues
selection ip access-list-dscp trust
Assign a name to a Policy List ip access-list-name
Add the name of an owner to a
Policy List ip access-list-owner
Delete an access-list element or a
Policy List no ip access-list
Activate a Policy List ip access-group
Deactivate a Policy List no ip access-group
Display the DSCP to CoS map of a
policy-list show ip access-list dscp
Set the list cookie for a specific
policy list ip access-list-cookie
Display an access list show ip access-list
Activate the “simulate” process for
a packet containing a specific field ip simulate
Test the validity of a Policy List validate-group