Avaya P332G-ML - Manual (Page 76)

Chapter 11 Avaya P330 Layer 2 Features
62 Avaya P332G-ML User’s Guide
VLAN CLI Commands
The following table contains a list of the CLI commands for the VLAN feature. The
rules of syntax and output examples are all set out in detail in the Reference Guide.
Table 11.2 VLAN CLI Commands
In order to... Use the following command...
Assign the Port VLAN ID (PVID) set port vlan
Define the port binding method set port vlan-binding-mode
Define a static VLAN for a port set port static-vlan
Configure the tagging mode of a
port set trunk
Create VLANs set vlan
Display the port VLAN binding
mode settings show port vlan-binding-mode
Display VLAN tagging information
of the ports, port binding mode,
port VLAN ID and the allowed
VLANs on a port show trunk
Display the VLANs configured in
the switch. show vlan
Clear VLAN entries clear vlan
Clear a VLAN statically configured
on a port clear port static-vlan
Clear the dynamic vlans learned by
the switch from incoming traffic clear dynamic vlans