Messages – Sony CMT-M90DVD User Manual

Page 52

Advertising
background image

52

GB

To save a tape permanently

To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.

If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.

Before placing a cassette in the tape

deck

Take up any slack in the tape. Otherwise, the tape
may get entangled in the parts of the tape deck and
become damaged.

When using a tape longer than

90 minutes

The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.

Demagnetising the tape heads

Demagnetise the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours
of use with a separately sold demagnetising cassette.
For details, refer to the instructions of the
demagnetising cassette.

In case color irregularity is observed

on nearby a TV screen

With the magnetically shielded type of speaker
system, the speakers can be installed near a TV set.
However, color irregularity may still be observed on
the TV screen depending on the type of your TV set.

If color irregularity is observed…

Turn off the TV set once, then turn it on after 15 to 30
minutes.

If color irregularity is observed

again…

Place the speakers farther away from the TV set.

Break off the
cassette tab

Messages

One of the following messages may appear or
flash in the display during operation.

DVD

No Disc

There is no DVD in the player.

Push STOP!

You pressed PLAY MODE/TUNING MODE
during play.

Cannot use

You pressed an invalid button.

CD

Cannot Edit

You tried to label a CD TEXT disc.

No Disc

There is no CD in the player.

OVER

You have reached the end of the CD while
pressing M during play or pause.

Step Full!

You tried to program 26 or more tracks (steps).

TAPE

Cannot SYNC!

There is no tape in the tape deck, or the tab has
been removed from the cassette.

No Tab

You cannot record the tape because the tab has
been removed from the cassette.

No Tape

There is no tape in the tape deck.

Protect

Consult your nearest Sony dealer.

TUNER

WAIT

The function is switching to the tuner.

Precautions (continued)

Advertising