Sony MDR-10RBT - Manual (Page 26)

Help Guide
MDR-10RBT Top > BLUETOOTH > BLUETOOTH connection >
Getting Started
BLUETOOTH
One-touch
connection (NFC)
Music
Phone calls
Multi point
connection
Troubleshooting
Important
information
Contents list
Pairing and connecting with an
Android smartphone
It is necessary to pair BLUETOOTH devices to establish a
BLUETOOTH connection. When pairing the headset with a
smartphone, place the smartphone within 1 meter (3 feet) of the
headset.
1. Enter pairing mode on the headset.
Press and hold the POWER button for more than 7 seconds.
Make sure that the indicator flashes blue and red alternately after
you release the button.
Note
If pairing is not established within about 5 minutes, pairing mode
will be cancelled and the headset will turn off. In this case, start
over from step 1.
2. Select the BLUETOOTH setting on the smartphone.
Select [Settings] [Bluetooth].
3. Turn on the BLUETOOTH function on the smartphone.
Touch the button next to [Bluetooth] to turn on [Bluetooth].
26
SEARCH