Sony MDR-10RBT User Manual
Page 27
Advertising
4. Search for this headset on the smartphone.
Touch [Bluetooth]
[Search for devices].
5. Touch [MDR-10RBT].
If passkey input is required, input “0000.”
A Passkey may be called a “Passcode,” a “PIN code,” a “PIN
number,” or a “Password.”
The above procedure is an example. For details, refer to the
manual supplied with your smartphone.
The headset and the smartphone are paired each other and
connected.
If they are not connected, see step 2 of “
.”
Tip
To delete all pairing information, see “
Note
Once BLUETOOTH devices are paired, there is no need for
pairing again, except in the following cases:
Pairing information is deleted after repair, etc.
27
SEARCH
Advertising