Sony MDR-10RBT - Manual (Page 36)

Help Guide
MDR-10RBT Top > BLUETOOTH > BLUETOOTH connection >
Getting Started
BLUETOOTH
One-touch
connection (NFC)
Music
Phone calls
Multi point
connection
Troubleshooting
Important
information
Contents list
Pairing and connecting with other
BLUETOOTH devices
It is necessary to pair BLUETOOTH devices to establish a
BLUETOOTH connection. When pairing the headset with a
BLUETOOTH device, place the BLUETOOTH device within 1 meter
(3 feet) of the headset.
1. Enter pairing mode on the headset.
Press and hold the POWER button for more than 7 seconds.
Make sure that the indicator flashes blue and red alternately after
you release the button.
Note
If pairing is not established within about 5 minutes, pairing mode
will be cancelled and the headset will turn off. In this case, start
over from step 1.
2. Perform the pairing procedure on the BLUETOOTH device to
search for this headset.
“MDR-10RBT” will be displayed on the list of detected devices on
the screen of the BLUETOOTH device. If “MDR-10RBT” is not
displayed, repeat from step 1.
3. Select “MDR-10RBT” on the screen on the BLUETOOTH device
to pair both devices.
If passkey input is required on the display of a BLUETOOTH
36
SEARCH