Connecting with a paired bluetooth device, Help guide – Sony MDR-10RBT User Manual

Page 38

Advertising

MDR-10RBT

Connecting with a paired

BLUETOOTH device

1. Turn on the headset.

Press and hold the POWER button for about 2 seconds.

Make sure that the indicator (blue) flashes after you release the

button.

If the BLUETOOTH device was connected with the headset the

last time, an HFP/HSP connection is made when you turn on the

headset.

While the headset is on, you can make an A2DP connection

(music playback) by pressing the

button.

Check the connecting status on the BLUETOOTH device. If not

connected, proceed to step 2.

2. Make the BLUETOOTH connection from the BLUETOOTH

device.

For details, refer to the manual supplied with your BLUETOOTH

device.

SEARCH

Advertising