Sony MDR-10RBT - Manual (Page 52)

Help Guide
MDR-10RBT Top > Music > Listening to music >
Getting Started
BLUETOOTH
One-touch
connection (NFC)
Music
Phone calls
Multi point
connection
Troubleshooting
Important
information
Contents list
Selecting the sound quality mode of
music playback
The sound quality is set to the “Standard” mode (SBC high quality
mode) as the default setting.
When using an AAC or aptX compatible device, select the “Priority
on sound quality” mode.
If the connection is unstable, such as when producing only
intermittent sound, select the “Priority on stable connection” mode.
Sound quality and the indicator (blue) of each mode
When the sound quality mode is switched, the headset indicates the
remaining battery capacity by flashing the indicator in red first, and
then in blue to indicate the sound quality mode. You can check the
current sound quality mode by the number of flashes of the indicator
(blue).
Mode Sound quality
Number of
flashes (blue)
Priority on
sound quality SBC (high quality), AAC or aptX
selected automatically
3 times
Standard SBC (high quality) Twice
Priority on
stable
connection
SBC Once
Note
When you turn on the headset by pressing the POWER button
only, the headset does not indicate the sound quality mode with
flashes of the indicator (blue).
Selecting the sound quality mode
Turn on the headset by pressing the POWER button for more than 2
seconds while holding the VOLUME + or VOLUME – button down.
52
SEARCH