Sony MDR-10RBT User Manual
Page 63
5. Use the other smartphone to establish a BLUETOOTH
connection with the headset.
6. In the same way, uncheck the function that you did not uncheck
in step 3.
7. Use the first smartphone to establish a BLUETOOTH connection
again.
Both smartphones are connected with the headset with only one
function enabled.
To call during playback
Make a phone call using the smartphone designated for making a
phone call.
If no dial tone is heard via the headset, switch the call device to
the headset using your smartphone or mobile phone. With an
HFP connection, you can do this by pressing the
button on the
headset for about 2 seconds.
To receive a call
When an incoming call arrives, the music playback pauses, and a ring
tone is heard via the headset.
Press the
button on the headset and talk using the microphone.
To end a call, press the
button on the headset again to switch
back to music playback.
Note
When no ring tone is heard even if an incoming call arrives, stop
music playback. When ringing, press the
button and talk.
To disconnect the call
Press the
button on the headset again to switch back to music
playback.
Related topic
Pairing and connecting with an Android smartphone
Pairing and connecting with an iPhone
Connecting with a smartphone by one-touch functions
Connecting the headset with an Android smartphone and an
© 2013 Sony Corporation
63
SEARCH